Ingenico Lane/3000 - Device Disconnected

Ingenico Lane 3000 : Device Disconnected

Article Contents: This article covers the steps to follow if your Ingenico Lane 3000 device is displaying "Disconnected."

Step-By-Step:

Step 1: Verify that you are using the provided multi-point mono connector (Ethernet) cable and power supply. The power supply plugs into the splitter on the Ingenico multi-point mono connector cable.

Step 2: Verify that the Ethernet jack on the multi-point mono connector cable is plugged securely into your router, modem, networking switch, or Ethernet wall jack.

Step 3: Verify that your device was obtained from the CardPointe shop, or your software provider.

Step 4: Consult with your IT administrator to verify that the Ethernet port being used has access to the Internet, and that your internal network  allows CardPointe Integrated Terminal connections. This will ensure that a firewall is not blocking the connection.

    • Related Articles

    • Ingenico Lane 3000 : User Guide

      Article Contents: This article covers an overview of the Ingenico Lane 3000 User Guide. This Ingenico Lane 3000 User Guide covers the device's features, setup process, and troubleshooting. It explains how to connect the device, enter text using the ...

    • Ingenico Lane 3000 : Restarting the Device

      Article Contents: This article will instruct you on how to restart your Lane 3000 device. Step-By-Step: Step 1: You can restart your terminal using either of the following methods: To perform a soft reboot, Access the Admin Menu and select the ...

    • Ingenico Lane 3000 : Device Restarting Unexpectedly

      Article Contents: This article explains how to correct the issue of a device unexpectedly restarting during the day, which is commonly caused by inaccurate time settings. It provides a step-by-step guide to updating your time settings in CardPointe. ...

    • Ingenico Lane 3000 : Time Setting

      Article Contents: To adjust the date and time in the Lane 3000 settings you will need to navigate the admin menu for the device by following the below instructions. Step-By-Step: Step 1: Accessing and Navigating the Admin Menu. - The Admin Menu ...

    • Ingenico Lane 3000 : Setting a Static IP Address for your Device

      Article Contents: Typically, the device is assigned an IP address automatically when connecting to a network. To manually set the network settings for the device, follow the steps below. Access the Admin Menu. Step-By-Step: Step 1: Press the down ...