Step 1: Download the latest printer drivers. This is specialized software that helps the printer run correctly on your computer.
To download this, go to Epson's website and select Windows Printer Driver.
Step 2: Click Download page on the latest file and scroll down to confirm the download. You should see the download start in the left-hand corner of the window.
Step 3: When this download is completed, go to your Downloads folder, right-click on the file, and select Extract All.
Not sure where to find the download? Go to explorer and select Downloads from the left-hand list. The download will also appear at the bottom of Google Chrome, click the arrow here and select show in folder.
Step 4: After extracting the file, a new folder will open. Double-click on the install and follow the installation guide instructions. Once installed you will see a confirmation box. Close this and continue to the next step.
Step 5: Installing your Epson Printer.
You will be brought to the printer setup screen where you'll need to input the following information:
Step 6: Model: Select Epson TM-m30II or TM-m30II-NT under model.
Step 7: Name: Type in a name of your choice or leave as default.
Step 8: Port Type: Set this to Ethernet.
Step 9: Port: Leave this as Auto setup.
IP Address: This is where you need to enter your printer's IP address. To find this you will need to switch the printer off and turn it back on, please wait for a few seconds until the network configuration slip is printed.