How to change the IP settings on a PAX S300 card reader.

PAX S300 : Changing IP Settings

Article Contents: This article show how to change the IP settings on a PAX S300 credit card reader

Step-By-Step:

Step 1: First press the 1 and the F buttons simultaneously on the credit card machine. This will then display a password prompt screen. The default password for the card reader will be 717777. Enter that password and then hit the green button on the card reader.
 
Step 2:This will bring up the main menu. From there press the down arrow on the touch screen once and you should see the "Communication" setting. Press that button, which will then bring up another password prompt screen. The password will be the same as the first one you entered. 717777.
 
Step 3: Now you should be at the communication Options screen. From there please press the down arrow on the touch screen two times. Now you should see the setting "Lan Parameters". Go ahead and click that.
 
Step 4:This will bring you to the Lan Parameters section. First, click on Lan Type and then click on static. After doing that, it should take you back to the Lan Parameters settings.
 
Step 5:Next click on IP address and input the IP address of the router and then hit the green arrow on the card reader.
 
Step 6:You should now be back at the Lan Parameters screen once again. Now click on Subnet mask and plug in the correct subnet mask and then hit the green arrow when finished.
 
Step 7:You will now be at the Lan Parameters screen again. Please click on GateWay IP and plug in the correct info and press the green button again.
 
Step 8:Now you will be back to the LAN parameters screen. From there, on the touch screen, please press the down arrow one time and you will now see four buttons. 
 
1. DNS mode (Change this setting to static)
2. DNS IP (Plug in the proper settings)
3. DNS IP 2 (Plugin the proper settings)
4. Ping (You can ignore this setting)
 
Once this is completed, the card reader should then display POS Online at the bottom of the screen.

    • Related Articles

    • Ingenico Lane 3000 : Setting a Static IP Address for your Device

      Article Contents: Typically, the device is assigned an IP address automatically when connecting to a network. To manually set the network settings for the device, follow the steps below. Access the Admin Menu. Step-By-Step: Step 1: Press the down ...

    • Installing Jonas Synergy on Windows 11 Home in S Mode

      Article Contents: This article covers the steps on how to install Jonas Synergy on a Windows 11 laptop running in S mode, which initially only allows installations from the Microsoft Store. Step-By-Step: Step 1: Determine if your Windows 11 is ...

    • Printer Paper Settings

      Article Contents: This guide outlines the steps required to adjust the paper settings to use 72mm x receipt paper. Step-By-Step: Accessing Printer Settings Step 1: Open the Control Panel and left-click on “View devices and printers” under the ...

    • Surface Go Recommended Settings

      Article Contents: This article includes the recommended settings for setting up your Surface Go device. Step-By-Step: Step 1: Download and install Jonas Synergy. Right Click - Pin to Start Right Click - Pin to Taskbar Step 2: Right Click on Desktop - ...

    • PAX S300 : "POSLink.dll" Error

      Article Contents: Below we'll be updating underlying windows services that are required to run payment transactions. Step-By-Step: Step 1: If you are receiving the following error on payment transactions: Step 2:Make sure the Microsoft Visual C++ ...