Surface Go Recommend Settings

Surface Go Recommended Settings

Article Contents: This article includes the recommended settings for setting up your Surface Go device.

Step-By-Step:

Step 1: Download and install Jonas Synergy. 
Right Click - Pin to Start
Right Click - Pin to Taskbar

Step 2: Right Click on Desktop - Set Resolution to 1920 X 1280
Set Zoom to 125% (150% may cut off some features)

Step 3: Taskbar Behavior - Automatically Hide.

Step 4: On-Screen Keyboard: Minimize so it doesn’t take up half of screen.

Note: 
A) If the device has Windows 10, you'll want to enable tablet mode. This is not required for Windows 11. 

B) The surface will not print to network printers in LTE mode. You must be connected to the same wireless network as the printer.

    • Related Articles

    • PAX S300 : Changing IP Settings

      Article Contents: This article show how to change the IP settings on a PAX S300 credit card reader Step-By-Step: Step 1: First press the 1 and the F buttons simultaneously on the credit card machine. This will then display a password prompt screen. ...

    • Printer Paper Settings

      Article Contents: This guide outlines the steps required to adjust the paper settings to use 72mm x receipt paper. Step-By-Step: Accessing Printer Settings Step 1: Open the Control Panel and left-click on “View devices and printers” under the ...

    • Ingenico Lane 3000 : Beep Settings Configuration

      Article Contents: This article provides an introduction on how to inform you to adjust the beep settings on your Lane 3000 device. Step-By-Step: Step 1: Access the Admin Menu by pressing O (the green button) to select Settings. Step 2: Press the down ...

    • Setting up a Default Printer

      Article Contents: Jonas Synergy utilizes the default printer for standard receipt print jobs such as transaction receipts and not kitchen and bar print jobs. Step-By-Step: Step 1: To choose a default printer, select the Start button and then ...

    • Configuring a Cash Drawer

      Article Contents: The below guide will walk you through configuring a cash drawer to automatically open. Step-By-Step: (If you are using an EPSON TM30, see the bottoms steps) Step 1: Plug in the RJ12 connector cable (which looks similar to a phone ...